Limewash Stucco and Concrete in Everett, WA

Everett Limewash Painting applies limewash to cement stucco, concrete block and poured concrete in Everett, Washington, on house exteriors, garden structures and basement walls. These porous, cement-based surfaces can take limewash once they are clean and sound. The result is a softly clouded, plaster-like finish in place of a flat painted look.

Stucco and concrete are alkaline and vary in texture and absorption, so readiness checks and a sample on the actual surface come first. Everett Limewash Painting provides stucco and concrete limewashing in Everett and surrounding communities, including Mukilteo, Mill Creek, Lake Stevens, Marysville, Snohomish and Lynnwood.

Request a stucco quote

Stucco cottage finished in warm sand-colored limewash

Stucco and concrete limewash options

Cement stucco exteriors

Bare or previously limewashed cement stucco suits limewash, which gives smooth and sand finishes a gentle tonal variation. Stucco painted with sound acrylic paint needs a bonding primer the limewash maker approves, while elastomeric coatings usually have to come off; hairline cracks need repair so water does not get behind the finish.

New stucco

Freshly applied stucco has to cure before limewash goes on. Romabio’s 2017 data sheet for its Classico limewash, for example, calls for about 21 to 28 days on new Portland cement stucco; other systems set their own requirements. The product chosen and the condition of the stucco decide when it is ready, and applying too early can leave blotchy color.

Concrete block and cinder block

Block garages, garden walls and foundations can lose their utilitarian look under limewash. Joints and block faces absorb differently, so a first coat worked into the texture, followed by a finish coat, gives a more even result.

Poured concrete walls

Board-formed and poured concrete walls, inside or out, can be limewashed for a softer stone-like tone. Form-release residue, curing compounds and sealers all reduce absorption, so cleaning and an absorption test come before sampling.

Basement and garage walls

Limewash is a traditional, breathable finish for masonry basement walls, brightening them without trapping moisture behind a film. It will not stop active leaks or hydrostatic pressure, so damp basements need the water problem solved first.

Close view of soft clouded limewash texture in raking light

Is your stucco or concrete ready?

Readiness checks look for cracks, hollow-sounding areas, efflorescence, previous coatings and water-repellent sealers. Acrylic paint and elastomeric coatings both stop limewash soaking in, but they are handled differently. Sound acrylic paint can take a bonding primer where the limewash maker provides one for that system. Elastomeric coatings are excluded by at least one major maker and normally have to be removed before limewashing.

Exterior coats need mild, dry weather, with protection from rain and strong sun while they cure, as for brick and stone.

Looks that suit stucco

Warm sand, chalk and pale clay limewash tones bring out the texture of stucco. Deeper earth tones work well on garden walls and outbuildings. Sample boards in your stucco’s texture show how much movement the finish will have.

Request a stucco or concrete limewash quote

Let us know whether the surface is stucco, block or poured concrete, whether it has been painted or sealed, and the property address.

Phone coming soon